Monday - Friday: 8am - 5pm | Saturday: 8:30am - 1pm

Menu My Cart

HM Water Pressure Systems with Torrium2 HM90-13T

HM Water Pressure Systems with Torrium2 HM90-13T

Brand: Davey

SKU: HM90-13T

Was $2,550.00

$1,970.00

Availability: Available

Make an Enquiry

Torrium2 Intelligent Controller	Adaptive controller continuously monitors water demand, eliminates pump cycling and maintains steady, consistent pressure automatically
High Flow & High Pressure	Nominal 90 lpm flow at 480 kPa with a maximum pump pressure of 680 kPa — the highest-pressure model in the HM90 range
Loss of Prime Protection	Torrium2 detects loss of prime and shuts the pump down immediately to prevent internal damage
Over Temperature Cut-Out	Automatically stops the pump if operating temperature exceeds safe limits, protecting the motor and pump from damage
All Stainless Steel Hydraulics	304 stainless steel casing, impellers and stages with 316L stainless steel pump shaft for outstanding corrosion and wear resistance
Suitable for High Water Temperatures	Robust stainless steel construction and EPDM seals handle elevated water temperatures with ease
High Efficiency Impellers	Optimised impeller profile with thick self-centring neck rings delivers maximum output with reduced power consumption and low noise
Compact Axial Suction Design	Horizontal layout with axial suction and vertical discharge minimises installation footprint and simplifies pipework
Air Purging Valve	Built-in air purging and stage porting simplifies priming and reduces susceptibility to air leaks for improved dependability
Direct Drive Motor Shaft	Impellers mounted directly on the extended motor shaft maximise efficiency per stage and extend the service life of both pump and motor
8-Point Casing Seal	Pump casing secured to motor bracket at 8 points with O-ring seal for superior leak resistance and longer service life
Thermal Overload Protection	Built-in automatic reset thermal overload protects the motor against damage from overheating or jamming
Surge Protection	Varistor surge protection built into the Torrium2 controller safeguards against electrical damage

Model	HM90-13T
Nominal Flow Rate	90 lpm
Nominal Operating Pressure	480 kPa
Maximum Pump Pressure	680 kPa
Tank Air Pre-charge	475 kPa
Maximum Continuous Flow	200 lpm
Maximum Operating Pressure	700 kPa*
Cut-in Pressure Range	80% of pump shut-off head
Supply Voltage	230V ±10% / Single Phase / 50Hz
Motor Speed	2,900 RPM
Suction Port	1¼" BSP Female
Discharge Port	1" BSP Male
Dimensions (L×W×H)	503 × 124 × 175 mm

HM Water Pressure Systems with Torrium2 HM90 13T

Bad Boy - Douglas Machinery

Kioti - Douglas Machinery

Stihl - Douglas Machinery