DynaDrive Constant Pressure System DD160-19
Brand: Davey
SKU: DD160-19
$3,846.36
Availability: Available
| Pump | Horizontal 5-stage centrifugal pump with all-stainless hydraulic components — corrosion and wear resistant |
|---|---|
| Impellers | High-efficiency impellers mounted directly on extended motor shaft for maximum performance, low noise, and long service life |
| Purge valve | Air purging valve for easier priming and reduced susceptibility to air leaks |
| Casing | 8-point o-ring sealed pump casing for superior sealing and longer service life |
| Temperature rating | Suitable for water temperatures up to 80°C |
| Motor | Davey-built TEFC motor with sealed, grease-for-life bearings and oversized drive end bearing |
| Controller | Variable speed drive (VSD) controller with adjustable pressure settings and fault warning indicators |
| Pressure | Constant pressure maintained at high flow rates — smooth, quiet operation |
| Compatibility | Daisy-chain compatible — up to 4 pumps in parallel for high-demand applications |
| Voltage | 220–240V ~ |
|---|---|
| Frequency | 50–60 Hz |
| Input power (P1) | 2.3 kW |
| Output power (P2) | 1.9 kW |
| Running current | 13 A |
| Max motor speed | 2,900 rpm |
| Insulation class | F |
| IP rating | IP55 |
| Inlet | 1½" BSP female (DN40) |
| Discharge outlet | 1¼" BSP female (DN32) |
| Pressure tank outlet | 1" BSP female (DN25) |
| Stages (impellers) | 5 |
| Flow @ 200 kPa | 208 lpm |
| Flow @ 300 kPa | 177 lpm |
| Water temperature range- 0–80°C |
| Ambient temperature range- 0–50°C |
| Max solids concentration- 40 g/m³ |
| Suitable fluidsClean, non-corrosive, non-flammable |
Related Products
