Tyre Shield Bottle 500ml

Brand: GASPARES

SKU: PTY7796

$87.32 (Each)

Availability: Available

Description:	Tyre Shield 500 ml Bottle.
Features:	Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
	of the tyre and 3mm in tube tyres as the vehicle is being driven.
	Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
	Does Not affect tyres or rims.
	Helps to extend tyre life by the combination of maintaining correct balance and the
	prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
	Balances tyres in motion. Seals all pourous leaks and bead leaks.)
	Australian Made.
Fits:	Puncture prevention treatment added to tyres and tubes prior to punctures. This product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four wheel drives, trailers etc.
Product Line Notes:	Directions For Use:-
	Balance tyres before applying. Tyres must be devoid of all matter i.e. other
	sealants, chalk, water etc, before application. Do not use this product where rims
	have been modified with brass or copper.
	1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
	2. DO NOT position valve below the 9 or 3 o’clock mark.
	3. Remove valve core and deflate tyre.
	4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
	valve stem.
	5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
	60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
	tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
	Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
	of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
	bike.
	6. Squirt compressor air into valve to clear any residue product before
	re-inserting valve core.
	7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
	application.
	TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
	ABOVE AMOUNT.
	On purchase the consumer will determine the suitability of the product for their
	intended use. The seller and manufacturer will not be liable for any loss, damage
	or injury arising direct or consequential, from use or misuse of this product.
	Retailer and manufacturer will replace only quantity of the product which proves to
	be defective. The above shall not be altered except by an agreement signed by the
	manufacturer.
Box Quantity:	5
Standard Pack Quantity:	1
Brand:	Tyre Shield,
Product Line:	Puncture Preventative Treatment,