DynaDrive Constant Pressure System DD60-10
Brand: Davey
SKU: DD60-10
$2,327.27
Availability: Available
| Pump | Horizontal multistage centrifugal pump with fully stainless steel hydraulics for lasting durability and performance. |
|---|---|
| Impellers | High-efficiency impellers mounted directly on extended motor shaft for maximum performance, low noise, and long service life |
| Purge valve | Air purging valve for easier priming and reduced susceptibility to air leaks |
| Seal | 8-point o-ring sealed pump casing for superior sealing and longer service life |
| Temperature rating | Suitable for water temperatures up to 80°C |
| Motor | Davey-built TEFC motor with sealed, grease-for-life bearings and oversized drive end bearing |
| Controller | Variable speed drive (VSD) controller with adjustable pressure settings and fault warning indicators |
| Pressure | Constant pressure maintained at high flow rates — smooth, quiet operation |
| Daisy-chain compatible | Up to 2 pumps in parallel for higher-demand applications |
| Voltage | 220–240V |
|---|---|
| Frequency | 50–60 Hz |
| Input power (P1) | 1.1 kW / 1.3 kW |
| Output power (P2) | 0.8 kW / 0.9 kW |
| 0.8 kW / 0.9 kW | 7.4 A / 8.6 A |
| Max motor speed | 2,900 rpm |
| Insulation class | F |
| IP rating | IP55 |
| Inlet | 1¼" BSP female |
| Discharge outlet | 1" BSP male |
| Pressure tank outlet | 1" BSP female |
| Stages (impellers) | 6 / 5 |
| Maximum head | 68 m / 59 m |
| Default operating pressure | 400 kPa |
| Flow rate @ 300 kPa | 60 lpm |
|---|---|
| Flow rate @ 400 kPa | 48 lpm |
| Flow rate @ 500 kPa | 32 lpm |



